Attwood 11596-2 Anti-Corrosion Manual Bilge Pump
Last updated date: September 11, 2021
Why Trust DWYM?
DWYM is your trusted product review source. Along with our in-house experts, our team analyzes thousands of product reviews from the most trusted websites. We then create one easy-to-understand review. Learn more.
We looked at the top Manual Bilge Pumps and dug through the reviews from some of the most popular review sites. Through this analysis, we've determined the best Manual Bilge Pump you should buy.
Update as September 10, 2021:
Checkout The Best Manual Bilge Pump for a detailed review of all the top manual bilge pumps.
When taking out your kayak or boat, it's a good idea to have this manual bilge pump on hand for potential emergencies. The unit is constructed from materials that are designed to resist corrosion. The attached hose measures 32 inches and can be removed to make storage easier.
In our analysis of 6 expert reviews, the Attwood 11596-2 Anti-Corrosion Manual Bilge Pump placed 1st when we looked at the top 8 products in the category. For the full ranking, see below.
From The Manufacturer
An important accessory for emergency situations, this hand operated bilge pump will quickly evacuate water from kayaks, boat decks, bilges or anywhere unwanted water collects. Corrosion-proof and easy to use, this pump includes a removable 32 inch hose. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.
User Summarized Score
What experts liked
What experts didn't like
Overall Product Rankings
An Overview On Manual Bilge Pumps
When you’re in a vehicle surrounded by water, it’s inevitable a little water might make its way into that vehicle. But if you should be unlucky enough to spring a leak while you’re away from land, that water can put you at risk of sinking.
That’s where a bilge pump comes in. Just as a sump pump extracts water from buildings, bilge pumps remove water from a boat. Whether you have a kayak, fishing boat, houseboat or another type of watercraft, a bilge pump can rescue you if you ever find yourself in that situation.
Bilge pumps aren’t just for hazardous situations, though. If water begins to infiltrate your boat, you may simply find that you’re dealing with an unpleasant situation. Swamping gives you nowhere dry to set your feet while you’re enjoying your day on the water. A bilge pump will help you keep the bottom dry until you can get to land and repair the issue that’s letting water in.
The good news is, you don’t have to have a bilge pump installed to have one on hand in case you need it. There are portable versions that you can store on your boat. Some are more portable than others, though, so if you have a smaller watercraft like a kayak, you may want to choose something that’s lightweight and easy to store.
But even if you have a larger boat, a smaller build can come in handy. You’ll find that it’s easier to find a place to keep your bilge pump. Since you’ll rarely need to use it, bulk will be more of a factor than weight. However, if you do need to grab it and run, having one that you can easily lift will come in handy.
Ask any boater, though, and one thing they want more than anything is power. Having to spend hours tediously extracting and dumping water from your boat can be not only exhausting but time-consuming. That’s time you could spend enjoying your excursion. Some manual pumps have motors, while others build in steel shafts to give a little oomph to each pump.
Whether your bilge pump is built onto your boat or you have a portable one, it’s important to occasionally perform maintenance on it. Even without use, bilge pumps can begin to rust and degrade over time, especially with so much exposure to moisture. Make a date to check in at least once a year. Make bilge pump maintenance part of your procedures when preparing your boat to go back out on the water at the end of winter.
The Manual Bilge Pump Buying Guide
- Even the bilge pumps built into a boat may not be sufficient in a serious emergency. Look at the capacity of your boat. If you’ll be heading more than a few hours away from land, consider investing in one that can extract hundreds of gallons of water per minute.
- There are two major types of bilge pumps: centrifugal and diaphragm. A centrifugal pump uses kinetic energy to extract water through a rotating impeller. This process allows the pump to remain inexpensive while still being functional. However, the other type of pump, a diaphragm pump, can operate when you need to pump water uphill. Diaphragm pumps act similarly to a Wet-Vac, using a sucking motion to extract the water.
- The size of your boat will determine the capacity of the bilge pump you need. The American Bureau of Shipping recommends having at least one 24-gallon-per-minute pump if your boat is under 65 feet. If your boat exceeds that size, you need to up the capacity accordingly.
- For portable pumps, the length of the hose is an important factor. A longer pump will help you reach into deeper boats without having to get down in the trenches. But the biggest benefit of a longer hose is that you can extract more water in each go, cutting down on the manual labor required.
- Although hose length is important, also look at the diameter of the hose. Wider hoses also will help move water more quickly and with less effort.
- Leaking is a serious issue with bilge pumps. Even a small leak will reduce your pump’s efficiency, requiring more work for a longer period of time than you would have to endure otherwise. Look for features like rubber seals and extra caulking to keep leaks to a minimum.
- Bilge pumps have filters to ensure only water is removed. If the filters clog, it can become a nuisance. A pump with clog-reducing features can be a huge help.
- You’ll have to occasionally clean your pump. Check to see if it comes with removable parts to make cleanup easier.
- You may never need it, but buoyancy can come in handy. If, for some reason, your pump drifts to the water outside your boat, you won’t have to worry about it sinking to the bottom of the ocean or lake.
- Since you’ll need to store your bilge pump, consider how you’ll store it. Obviously, smaller is better in this regard, but also keep in mind that you might want to mount it. In that case, a suction cup or a way to hang it on a hook can be essential.
- Consider how your bilge pump gets power. The wiring can be damaged by exposure to water, which will be a problem if your boat takes on excessive water.
- Even if your boat has a bilge pump built in, it’s not guaranteed to work when you need it. The electricity could fail or the device itself could simply stop working. Having a portable one on hand can give you the security of knowing that you’ll a backup on hand if you need it.
Checkout Our Other Buying Guides
- The Robotic Vacuum Guide
- The Cordless Vacuums Guide
- The Electric Pressure Washer Guide
- The Gas Pressure Washer Guide
- The Air Mattress Guide
- The Pressure Washer Guide
- The Drone Guide
- The Electric Razor Guide
- The Convertible Car Seat Guide
- The Dyson Vacuum Guide
- The Infant Car Seat Guide
- The Dry Dog Food Guide
- The Carpet Cleaners Guide
- The Coffee Maker Guide
- The Air Fryer Guide