MICROJIG 3D Pushblock Router Table

Last updated date: April 24, 2019

DWYM Score
8.6

Why Trust The DWYM Score?

DWYM is your trusted product review source. Along with our in-house experts, our team analyzes thousands of product reviews from the most trusted websites. We then create one easy-to-understand score. Learn more.

Look for the DWYM seal for products that are the best in the category.

We looked at the top 1 Router Tables and dug through the reviews from 8 of the most popular review sites including Gist Gear, Table Saw Central, Tool Guyd, Review Infinite, Teach Your Son, Sanvada, Best Saw Reviews, APM Design Labs and more. Through this analysis, we've determined the best Router Table you should buy.

Overall Take

In our analysis of 87 expert reviews, the MICROJIG MICROJIG 3D Pushblock Router Table placed 5th when we looked at the top 10 products in the category. For the full ranking, see below.

Editor's Note May 23, 2019:
Checkout The Best Router Table for a detailed review of all the top router tables.

Expert Summarized Score
10.0
8 expert reviews
User Summarized Score
9.0
960 user reviews
Our Favorite Video Reviews
What experts liked
The powerful Green GRR-RIP gives you a commanding hold over the work piece for total control. GRR-RIPPER has three legs to give you three-directions of control on the Keeper and Off-Cut work piece. It provides downward pressure to virtually eliminate kickback, inward pressure to keep the stock against the fence, and forward pressure to prevent burning.
- Gist Gear
March 25, 2019 | Full review
The GRR-Ripper has two fixed feet on either edge and an adjustable foot in the middle which allows you to position it so it doesn’t strike the blade when making the cut. Each foot has a very grippy non slip foot, which securely holds the workpiece when pushing it through the blade.
- Table Saw Central
February 15, 2018 | Full review
The push block spacers are adjustable, as is an L-shaped piece of plastic that I found to aid in stability.
- Tool Guyd
September 12, 2016 | Full review
This mid-range push block for the table saw has a good quality gripping system to hold the workpiece tightly. And for this tight gripping the push block is able to prevent kickback.
- Review Infinite
Compared to a push stick, the GRR-RIPPER gives much better control on narrow rip cuts. The reduction of kickback is one of the greatest pros for this push block. The GRR-RIPPER is especially helpful for longer cuts when you don’t have an outfeed table. Longer pieces will tend to push up at the end because of the weight on the other side. The push block allows you to maintain downward pressure on the piece.
- Teach Your Son
GRR-Ripper is solid. Living up to its self-acclaimed tag of made in America. Fashioned out of high impact polystyrene, the GRR-Ripper forms a protective shield from three directions while you navigate the piece of wood over the revolving blade.
- Sanvada
April 13, 2017 | Full review
One of the things that stands out in this model is the 3 directions of force, which enhance your protection while giving you perfect control and utmost precision.
- Best Saw Reviews
3-Directional Force for Unmatched Control of the Work piece. Moving-Blade-Guard Hand Protection. Precise 1/4" Thin Rips. Virtually Eliminates Kickback. Work with Small. Stock Safely on the Table Saw, Router Table, Jointer, & Band Saw.
- APM Design Labs
What experts didn't like
Sometimes it could be hard to set the device.
- Review Infinite
Be aware that you may need to remove the blade guard on your table saw to use this push block. However the GRR-RIPPER will still keep your hands safely away from the blade.. While it may seem expensive at first, it’s completely worth the price for the added safety and control when you’re ripping narrow pieces on your table saw.
- Teach Your Son
The protective function is limited to wood lengths of less than 18 inches long.
- Sanvada
April 13, 2017 | Full review

From The Manufacturer

GRR-RIPPER 3D Pushblock a must-have for any table saw user. It's essential for superior precision, control and safety on your table saw and other major woodworking machinery. Protect your hands like never before, virtually eliminate kickback with unmatched control, and guide and rip with surgical precision. EXTREME CONTROL. The powerful Green GRR-RIP gives you a commanding hold over the work piece for total control. GRR-RIPPER has three legs to give you three-directions of control on the Keeper and Off-Cut work piece. It provides downward pressure to virtually eliminate kickback, inward pressure to keep the stock against the fence, and forward pressure to prevent burning. Stabilize your cut with the Built-in Balance Support to square your cut and safely handle the smallest parts of wood when cutting on the table saw or router table. Rip as accurate as a 1/4" standard without readjusting the fence. The Adjustable Center Leg accommodates for a variety of different sizes and widths of material while the grip secures a virtually unlimited variety of woods, solid surfaces, aluminum or even plastic. GRR-RIPPER Handle can be angled and adjusted for your comfort and control.

Overall Product Rankings

1. Kreg True-Flex Router Table
Overall Score: 9.6
Expert Reviews: 8
2. Bosch Benchtop Router Table
Overall Score: 9.0
Expert Reviews: 10
3. Skil Router Table
Overall Score: 8.9
Expert Reviews: 10
4. Bench Dog Tools ProMax Cast Iron Router Table
Overall Score: 8.8
Expert Reviews: 10
5. MICROJIG 3D Pushblock Router Table
Overall Score: 8.6
Expert Reviews: 8
6. Goplus Electric Aluminum Router Table
Overall Score: 8.4
Expert Reviews: 9
7. Dremel 231 Router Table
Overall Score: 8.4
Expert Reviews: 7
8. Craftsman Router Table Combo
Overall Score: 8.4
Expert Reviews: 10
9. Kreg Bench Top Router Table
Overall Score: 8.2
Expert Reviews: 3
10. Chicago Electric Power Tools Benchtop Router Table
Overall Score: 7.3
Expert Reviews: 4

An Overview On Router Tables

No woodworking shop is complete without a sturdy router table. Once you have a table in place, you can tackle some of the bigger projects that wouldn’t otherwise be open to you. But there are a few features to consider when you’re looking for a router table, including sturdiness and compatibility.

If you already have a router, you’ll first want to make sure the table you buy will work with it. Not all tables will work with all routers. You’ll need to pay close attention to the base plate, which usually will only work with a specific router model. Some tables come with plates that you can drill to fit, but don’t buy into router tables that promise to fit every router.

The build of the table plays an important role in how much control you’ll have over your cuts. A flimsy table may not offer the stability you’ll need. However, extra sturdy construction can sometimes make a piece of furniture difficult to move, so weigh your need for portability against user experience. If you plan to set your table up and never move it, this may not be a consideration.

If you’ve worked with a router in the past, you likely already realize the importance of a good fence. For precise cuts, you’ll need a solid fence that helps you complete the job. Some fences are built to move easily across the table’s surface, making it easier for you to focus on the task at hand.

Although it might not be the first thing you consider, you’ll wish you had a dust collection bin after you start working. Some router tables have collection bins, and some use a shield to protect you from flying dust while you’re working. More advanced dust collection systems hook up to a device like a shop vac to contain dust so you don’t even have to deal with it.

DYWM Fun Fact

A router table is an essential tool in any woodworker’s workshop. Once you have it set up, you can tackle a wide range of projects, creating smooth edges and specialized designs like dovetails. When you’re working with a pattern, a router table will hold everything in place, allowing you to devote both hands to moving the wood around. It also can be used as a jointer, saving you the need to purchase a separate tool. If you ever have the need to build a raised panel door, the router table can handle it easily, as long as you have a raised panel bit and a door edge bit. In fact, with the right tools, you can expand to a wide variety of woodworking projects.

The Router Table Buying Guide

  • Before you start shopping, make sure you know the type of router you have. You’ll need to check to see if the table you buy is compatible. The Bosch Benchtop Router Table has predrilled plates that will fit a range of routers. With the Chicago Electric Power Tools, the router is included so you won’t have to worry about matching it.
  • Most of your contact with the table will be with the surface, so it’s important to find one that creates a pleasant experience. It needs to be smooth to ensure that nothing gets in the way of creating accurate cuts. The Bosch Benchtop Router Table has a laminated top to provide that smooth surface, but the lamination means it also scratches fairly easily. The Skil Router Table is prone to warping over time, so make sure you regularly check the surface for irregularities. The table on Chicago Electric Power Tools is made from composite medium-density fiberboard, which not only promotes smoothness but also keeps vibrations to a minimum.
  • The size of the workspace area on the tabletop is also worth considering. The Kreg True-Flex Router Table has a 24- by 32-inch surface area, while the Bosch Benchtop Router Table is limited to 27 inches by 18 inches. The Skil Router Table is 29 by 18.
  • The steel stand on the Kreg True-Flex Router Table makes it sturdier than competing tables, which means you won’t have to worry about inaccuracy due to wobbling or slipping.
  • When it comes to price, the best bargain comes with the Chicago Electric Power Tools table. It comes with a router and accessories, all for less than you’ll pay for most router tables. You’ll pay more than $200 for the Bosch Benchtop Router Table and more than $600 for the Kreg True-Flex Router Table.
  • Controlling your cuts is all about the fence. You should pay as much attention to the fence on the table you’re buying as the overall construction of the table itself. The Kreg True-Flex Router Table and Skil Router Table both have easy-to-move fence systems with adjustable clamps. You’ll find the Bosch Benchtop Router Table doesn’t move quite as smoothly, making it a bit tougher to control.
  • If you plan to store your table when not in use or take it to various job sites, you’ll want to consider the weight. Although the Kreg True-Flex Router Table’s sturdy construction boosts stability, the fact that it weighs 85 pounds makes it far tougher to transport. The good news is, it comes with casters, so you can roll it around your workshop. The Bosch Benchtop Router Table only weighs 30 pounds, while the Chicago Electric Power Tools is a lightweight 28 pounds. One handy feature of the Skil Router Table is that the legs fold to make it easy to move and store.
  • If you deal with a messy workshop, you’ll love the fact that the Skil Router Table has accessory storage compartments where you can keep all your tools and parts.
  • Any time you’re working with wood, dust is an inevitability. The Kreg True-Flex Router Table has a built-in dust collection port, as well as a shield that protects your face from flying sawdust while you’re working. The dust collection port on the Bosch Benchtop Router Table can connect to a 2.5-inch hose, allowing you to hook up a shop vac to capture all the dust. The Skil Router Table is designed to keep dust to a minimum from the start.
  • If you’re new to woodworking, the Skil Router Table or Chicago Electric Power Tools will be more your speed. Those with more experience will likely find that the Kreg True-Flex Router Table and Bosch Benchtop Router Table can handle the more advanced challenges they want to tackle.