Maytag Quick Wash Front Load Washing Machine

Last updated date: November 16, 2021

DWYM Score


Maytag Quick Wash Front Load Washing Machine

Why Trust DWYM?

DWYM is your trusted product review source. Along with our in-house experts, our team analyzes thousands of product reviews from the most trusted websites. We then create one easy-to-understand review. Learn more.

Don't Waste Your Money Seal of Approval
Look for the DWYM seal for products that are the best in the category.
Show Contents

We looked at the top Front Load Washing Machines and dug through the reviews from some of the most popular review sites. Through this analysis, we've determined the best Front Load Washing Machine you should buy.

Update as November 24, 2021:
Checkout The Best Front Load Washing Machines for a detailed review of all the top front load washing machines.

Overall Take

In our analysis of 70 expert reviews, the Maytag Quick Wash Front Load Washing Machine placed 12th when we looked at the top 17 products in the category. For the full ranking, see below.

From The Manufacturer

To take on your toughest jobs, this large capacity Maytag washer gives you the Best Cleaning in the industry driven by the PowerWash system. The PowerWash cycle’s extra wash action and an internal heater help remove everyday tough stains in a single wash. With 4.5 cubic feet capacity, there’s enough room to wash 29 towels at once in this front load washer. An extra boost from the Steam for Stains option helps power out stubborn stains, while the Sanitize cycle removes 99.9 percent of household bacteria to give you peace of mind. And when you’re in a hurry, use the Rapid Wash cycle on your front load washer to clean small loads quickly. Tackle extra-large loads with 4.3 cubic feet capacity, enough space to clean 29 towels at once. Sturdy stainless steel wash basket is built for the long haul and will stay looking great. Use the Steam for Stains option with select cycles to power out stains using the additional soak time, optimal water temperature and boost of steam. PowerWash cycle gives stains a real kick in the pants. It helps fight stains with extra wash action, heated water, extended wash time and a thorough rinse. 8 wash cycles including Cold Wash, Delicates, Drain and Spin, Normal (cotton), Powerwash, Rapid Wash, Sanitize, and Clean Washer with affresh provide optimal care and cleaning for a variety of fabrics. Sanitize cycle removes 99.9 percent of household bacteria with extra hot water temperature, delivering thorough cleaning and peace of mind. ENERGY STAR qualified with a CEE Tier III rating, making it among the most efficient washers in the industry. Front panel tap-touch controls with cycle memory allow for easy access to all cycle selections. Plus, once you’ve found your favorite stain-fighting options on each cycle, this washer will automatically apply them the next time you use that cycle.

Expert Reviews

Expert Summarized Score

3 expert reviews

User Summarized Score

9,885 user reviews

What experts liked

It earns an Excellent rating in CR washing tests, and is gentle on fabrics, relatively quiet, and highly efficient in terms of water and energy use.
- Consumer Reports
The 3505 also has a Sanitize cycle and the ability to add steam, which means this Maytag has an internal hot water heater when temperatures need a boost. That's exceptionally rare for a sub-$600 machine.
- Reviewed
January 3, 2019 | Full review
Stylish and quiet. Has all the features we need. Huge capacity with a solid build. Controls are simple and easy to use.

What experts didn't like

Our Expert Consultant

Vicki Liston 
Home Improvement Expert

Vicki Liston writes, produces, and narrates “On The Fly…DIY,” an award-winning home improvement and DIY show of unique project tutorials for the casual DIY’er.

Home improvement and all things DIY have been Liston’s passion since she bought her first house in 2007 and she started making video blogs in 2014. She’s performed hundreds of DIY projects, from small ones to major, wall-smashing renovations and can teach you how to make a trendy DIY barn door for cheap. The proceeds earned from “On The Fly…DIY” are donated to no-kill animal shelters and rescue organizations. You can find her show on Prime Video.

An Overview On Front Load Washing Machines

When you’re picturing a washing machine, a lot of people still pull up a mental image from the laundromat: rows and rows of top-loading washers, all dutifully churning away.

Maybe that traditional image is why top-loading washers are still out there in many homes. And while top-loaders may fit the needs (and budget) of the average laundromat, front-loading washers are the way to go for many homeowners.

To get a fair comparison, let’s get a quick look at how these two types of washing machines work. As you might imagine, top-loading washers are called that because that’s how the clothes are loaded in: through the top. Once they’re in the drum, it fills up with enough water to submerge the clothes, the amount of which can generally be adjusted by load size. The machine then dumps in whatever detergent you’ve added, and the wash cycle begins.

In a traditional top-loading washer, that cleaning is done primarily with an agitator. That’s a large column in the middle of the drum with paddles running diagonally down the side, reminiscent of a boat propeller. The agitator spins at various speeds and in various directions, rubbing dirt and particles off the clothes and distributing detergent through the mix.

That agitator is great for getting out stains, but it’s also a bit rough on delicate materials. That’s why you see an increasing number of top-loading washers marked as high-efficiency. That means, among other things, that there’s no agitator in the middle of the drum. Clothes are simply cleaned by the spinning action of the drum, which rubs clothes repeatedly against each other and the serrated edges on the sides.

All front-loading washing machines work on that same basic principle, too. Rather than a hatch at the top, you put clothes into a front-loading washer through a door at the front. During that high-efficiency wash cycle, clothes are spun on a horizontal axis. The difference here is that there’s no need to fill the entire drum. The wash load is simply dipped repeatedly into a reservoir of water at the bottom as it rotates through. Not only does that kinetic action help with the cleaning, but it also saves a ton of water.

And there you have the primary attraction for front-loading washers over their top-fed counterparts: energy efficiency. On average, front-loaders use five gallons less water per load, which adds up to a savings of 2,000 gallons per year. That’s a lot of water and a lot of money off the utility bill. The actual amount used can vary greatly by model and its individual settings, but penny-pinchers or the environmentally conscious will want to look for an Energy Star certification. That means the washer will use no more than 14 gallons per load.

You can still wash plenty of clothes per cycle in a front load washer, even though it uses less water. “The standard-sized front loader is between a 4.2 and 4.5 cubic foot capacity, which can easily accommodate a queen-sized comforter,” says Vicki Liston, host of “On The Fly…DIY,” an award-winning home improvement show. “Compact versions can go as low as 3.5 cubic feet while large capacity versions range upward from 4.5 to over 6 cubic feet, perfect for large families and king-sized comforters.”

With no agitator, front-loading washers are also more gentle on delicate fabrics, while still performing as well or better than the latest top-loaders. There’s a bunch of other areas in which the average front-loader comes out on top. Most will have a larger capacity, especially when compared to old-school agitator washers. And the construction benefits from gravity, allowing for a faster spin in many cases.

Your results will vary by model and manufacturer, of course, and there are a few minor hassles inherent to front-loaders. For starters, they generally require a bit more maintenance. And older or less mobile consumers take heed: Loading your wash on the front means kneeling down, a necessity that top-loaders do not have. Of course, there is a simple way around that problem, such as mounting the washer on a pedestal or dryer. (Or simply buying a washer/dryer combo that is set up that way from the get-go.)

And as you can guess with any technological advancement, they do tend to cost a bit more. Shop around, though! These days, you can find some fairly advanced features even on washers that are very affordable.

The Front Load Washing Machine Buying Guide

  • When buying any washer, the various settings, spin speeds and features are going to be the first things that catch your eye. Just remember that none of them mean much if the unit doesn’t fit in your utility room. You’ll want to look at the dimensions of a new washer, and add in plenty of extra space at the front to accommodate the opening door and your chore-doing self. Speaking of the door, which way does it open? Figuring that into the equation will save you some head-slapping later. Many models even have doors that can be installed on the left or right as needed.
  • Speaking of saving space, top-loading washers might be more compact, especially when you add in the space for that opening door. But front-loaders can more than make up for that liability with the ability to stack laundry items — or even a dryer — on top. Not all front-loading washers are built that way, though. Take a look at the controls and detergent receptacle and make sure they’re not mounted on the top where they can get covered up. Most washers will give a heads up in the manual or warranty regarding their weight capacity.
  • Read enough reviews for front-loading washers, and you’ll find that a lot of the negative ones have one thing in common: mold. It’s true that it can be a problem for some budget washers, but it’s usually quite fixable. The issue stems from the way front-loaders operate. Unlike a top-loader, the door seals tightly to make sure the water doesn’t spill out during the washing process. That’s great, but what happens when the wash is all done? The residual moisture still gets trapped inside the drum, and that allows mold to grow. If you don’t mind leaving the door open when the washer isn’t in use, that can help a great deal. You might also wipe down the interior after each wash, making sure to get inside the folds of the gasket around the door. If that’s too much upkeep, most front-loading washers do have a self-cleaning cycle. Just run it once a month or as directed, using a special cleaning fluid that will absorb the moisture and eliminate any smells that come with it.
  • Home improvement expert Liston has a few more tips for keeping your washer smelling fresh. “Remove your clean loads as soon as they finish. It’s also smart to run a monthly empty load with two cups of either white vinegar or bleach to remove detergent and fabric softener build-up.”
  • No matter how fancy your washer is, you’ll need to give it the tools to do its job effectively. That means using the right kind of detergent, which is HE. That stands for high efficiency, and it was developed for use as newer washers came on the market that did not use as much water. In the agitator-style washers, detergent was designed to get sudsy. Those suds would ostensibly hold the dirt and keep it from getting re-applied to the fabric. In the more energy-efficient front-loading washers, those suds can’t do their work as well in the smaller reservoir of water. They might even end up spilling out of your detergent receptacle or oozing through your door. Even in the best-case scenario, the suds will end up sticking to your clothes, making them feel abrasive or itchy. HE detergent produces little or no suds, using a different reaction to pull stains away and keep them in the solution.
  • Experiment with the amount of detergent you use, too. Filling up the detergent cup too much won’t necessarily lead to cleaner clothes. If your load is especially small, it can even make them filmy or result in icky leftover detergent. It will save you money and headaches to do a little reading, both on your detergent bottle and washer manual. Is your detergent a 2X concentrate (meaning double the concentration of cleaning fluid)? Use half as much as you normally would. And start with the guidelines in your washer manual, which generally recommend using less detergent than your bottle might say.
  • Finally, don’t overload your clothes. Washer repairmen say that’s the top cause of wear and tear on front-loading washers. Heavy loads of clothes put plenty of strain on the back bearings that keep the drum in place, and those can get mighty expensive to replace.