DEAL OF THE DAY: Spend $60 on spring cleaning supplies and get a $15 Amazon credit

Extreme Dog Fence Waterproof Submersible Invisible Fence

Last updated: June 5, 2023

Extreme Dog Fence Waterproof Submersible Invisible Fence
Show Contents

We looked at the top Invisible Fences and dug through the reviews from some of the most popular review sites. Through this analysis, we've determined the best Invisible Fence you should buy.

Overall Take

The Extreme Dog Fence is a system that keeps your dog from leaving your property without the hassle of having to erect a fence.

This dog fence system provides a collar for your dog that has the ability to shock them if they wander beyond their designated area.

The collar is made from a standard nylon webbing material that is red in color. If the red collar isn’t what you want, you can remove the hardware from this collar and attach it to whatever collar you choose. There are two different sets of contact probes that are interchangeable based on what is best for your dog.

The fence itself has a digital transmitter with a power supply.  It comes with 1,000 feet of 14-gauge boundary wire with a polyethylene jacket for protection.

You will bury the wire around the perimeter of the area you have chosen, generally your entire yard or one part of your yard. The wire should be buried between 1-inch and 18-inches deep for best practice, but they include landscaping staples in case you need to have the wire aboveground. In this case, you would use the staple to hold the wire down to the ground as low as possible so it isn’t a tripping hazard.

If you have an existing fence, this wire can also be run along the fence itself. If you want to have a boundary in a pond or lake, the coated wire even allows you to install it underwater.

The digital transmitter is the final piece of the puzzle and the brains of the system. You will set your signal field width on the transmitter which will determine how far from the fence that the collar will activate. You can cycle through AM radio frequencies to find one that works best.

The transmitter is to be mounted indoors as it is not waterproof and it should be more than three feet away from any large metallic objects.

There is a feature called TEMP CHECK that uses outdoor temperatures to constantly alter the range of the fence to keep it accurate to your initial settings.

WIRE CHECK is another feature that identifies wire problems and can alter the strength of the signal to make sure your boundary width is consistent as well.

The transmitter will even monitor the strength of the battery in the dog’s collar to ensure that it is on and working when it should be.

With waterproof boundary wire and a smart transmitter system, this electric dog fence is an easy way to contain your dog without needing to build a large fence. The Extreme Dog Fence is a system that keeps your dog from leaving your property without the hassle of having to erect a fence. This dog fence system provides a collar for your dog that has the ability to shock them if they wander beyond their designated area. The collar is made from a standard nylon webbing material that is red in color. If the red collar isn’t what you want, you can remove the hardware from this collar and attach it to whatever collar you choose. There are two different sets of contact probes that are interchangeable based on what is best for your dog. The fence itself has a digital transmitter with a power supply.  It comes with 1,000 feet of 14-gauge boundary wire with a polyethylene jacket for protection. You will bury the wire around the perimeter of the area you have chosen, generally your entire yard or one part of your yard. The wire should be buried between 1-inch and 18-inches deep for best practice, but they include landscaping staples in case you need to have the wire aboveground. In this case, you would use the staple to hold the wire down to the ground as low as possible so it isn’t a tripping hazard. If you have an existing fence, this wire can also be run along the fence itself. If you want to have a boundary in a pond or lake, the coated wire even allows you to install it underwater. The digital transmitter is the final piece of the puzzle and the brains of the system. You will set your signal field width on the transmitter which will determine how far from the fence that the collar will activate. You can cycle through AM radio frequencies to find one that works best. The transmitter is to be mounted indoors as it is not waterproof and it should be more than three feet away from any large metallic objects. There is a feature called TEMP CHECK that uses outdoor temperatures to constantly alter the range of the fence to keep it accurate to your initial settings. WIRE CHECK is another feature that identifies wire problems and can alter the strength of the signal to make sure your boundary width is consistent as well. The transmitter will even monitor the strength of the battery in the dog’s collar to ensure that it is on and working when it should be. The Extreme Dog Fence is a system that keeps your dog from leaving your property without the hassle of having to erect a fence. This dog fence system provides a collar for your dog that has the ability to shock them if they wander beyond their designated area. The collar is made from a standard nylon webbing material that is red in color. If the red collar isn’t what you want, you can remove the hardware from this collar and attach it to whatever collar you choose. There are two different sets of contact probes that are interchangeable based on what is best for your dog. The fence itself has a digital transmitter with a power supply.  It comes with 1,000 feet of 14-gauge boundary wire with a polyethylene jacket for protection. You will bury the wire around the perimeter of the area you have chosen, generally your entire yard or one part of your yard. The wire should be buried between 1-inch and 18-inches deep for best practice, but they include landscaping staples in case you need to have the wire aboveground. In this case, you would use the staple to hold the wire down to the ground as low as possible so it isn’t a tripping hazard. If you have an existing fence, this wire can also be run along the fence itself. If you want to have a boundary in a pond or lake, the coated wire even allows you to install it underwater. The digital transmitter is the final piece of the puzzle and the brains of the system. You will set your signal field width on the transmitter which will determine how far from the fence that the collar will activate. You can cycle through AM radio frequencies to find one that works best. The transmitter is to be mounted indoors as it is not waterproof and it should be more than three feet away from any large metallic objects. There is a feature called TEMP CHECK that uses outdoor temperatures to constantly alter the range of the fence to keep it accurate to your initial settings. WIRE CHECK is another feature that identifies wire problems and can alter the strength of the signal to make sure your boundary width is consistent as well. The transmitter will even monitor the strength of the battery in the dog’s collar to ensure that it is on and working when it should be. The Extreme Dog Fence is a system that keeps your dog from leaving your property without the hassle of having to erect a fence. This dog fence system provides a collar for your dog that has the ability to shock them if they wander beyond their designated area. The collar is made from a standard nylon webbing material that is red in color. If the red collar isn’t what you want, you can remove the hardware from this collar and attach it to whatever collar you choose. There are two different sets of contact probes that are interchangeable based on what is best for your dog. The fence itself has a digital transmitter with a power supply.  It comes with 1,000 feet of 14-gauge boundary wire with a polyethylene jacket for protection. You will bury the wire around the perimeter of the area you have chosen, generally your entire yard or one part of your yard. The wire should be buried between 1-inch and 18-inches deep for best practice, but they include landscaping staples in case you need to have the wire aboveground. In this case, you would use the staple to hold the wire down to the ground as low as possible so it isn’t a tripping hazard. If you have an existing fence, this wire can also be run along the fence itself. If you want to have a boundary in a pond or lake, the coated wire even allows you to install it underwater. The digital transmitter is the final piece of the puzzle and the brains of the system. You will set your signal field width on the transmitter which will determine how far from the fence that the collar will activate. You can cycle through AM radio frequencies to find one that works best. The transmitter is to be mounted indoors as it is not waterproof and it should be more than three feet away from any large metallic objects. There is a feature called TEMP CHECK that uses outdoor temperatures to constantly alter the range of the fence to keep it accurate to your initial settings. WIRE CHECK is another feature that identifies wire problems and can alter the strength of the signal to make sure your boundary width is consistent as well. The transmitter will even monitor the strength of the battery in the dog’s collar to ensure that it is on and working when it should be. The Extreme Dog Fence is a system that keeps your dog from leaving your property without the hassle of having to erect a fence. This dog fence system provides a collar for your dog that has the ability to shock them if they wander beyond their designated area. The collar is made from a standard nylon webbing material that is red in color. If the red collar isn’t what you want, you can remove the hardware from this collar and attach it to whatever collar you choose. There are two different sets of contact probes that are interchangeable based on what is best for your dog. The fence itself has a digital transmitter with a power supply.  It comes with 1,000 feet of 14-gauge boundary wire with a polyethylene jacket for protection. You will bury the wire around the perimeter of the area you have chosen, generally your entire yard or one part of your yard. The wire should be buried between 1-inch and 18-inches deep for best practice, but they include landscaping staples in case you need to have the wire aboveground. In this case, you would use the staple to hold the wire down to the ground as low as possible so it isn’t a tripping hazard. If you have an existing fence, this wire can also be run along the fence itself. If you want to have a boundary in a pond or lake, the coated wire even allows you to install it underwater. The digital transmitter is the final piece of the puzzle and the brains of the system. You will set your signal field width on the transmitter which will determine how far from the fence that the collar will activate. You can cycle through AM radio frequencies to find one that works best. The transmitter is to be mounted indoors as it is not waterproof and it should be more than three feet away from any large metallic objects. There is a feature called TEMP CHECK that uses outdoor temperatures to constantly alter the range of the fence to keep it accurate to your initial settings. WIRE CHECK is another feature that identifies wire problems and can alter the strength of the signal to make sure your boundary width is consistent as well. The transmitter will even monitor the strength of the battery in the dog’s collar to ensure that it is on and working when it should be.

The Extreme Dog Fence is a system that keeps your dog from leaving your property without the hassle of having to erect a fence.

This dog fence system provides a collar for your dog that has the ability to shock them if they wander beyond their designated area.

The collar is made from a standard nylon webbing material that is red in color. If the red collar isn’t what you want, you can remove the hardware from this collar and attach it to whatever collar you choose. There are two different sets of contact probes that are interchangeable based on what is best for your dog.

The fence itself has a digital transmitter with a power supply.  It comes with 1,000 feet of 14-gauge boundary wire with a polyethylene jacket for protection.

You will bury the wire around the perimeter of the area you have chosen, generally your entire yard or one part of your yard. The wire should be buried between 1-inch and 18-inches deep for best practice, but they include landscaping staples in case you need to have the wire aboveground. In this case, you would use the staple to hold the wire down to the ground as low as possible so it isn’t a tripping hazard.

If you have an existing fence, this wire can also be run along the fence itself. If you want to have a boundary in a pond or lake, the coated wire even allows you to install it underwater.

The digital transmitter is the final piece of the puzzle and the brains of the system. You will set your signal field width on the transmitter which will determine how far from the fence that the collar will activate. You can cycle through AM radio frequencies to find one that works best.

The transmitter is to be mounted indoors as it is not waterproof and it should be more than three feet away from any large metallic objects.

There is a feature called TEMP CHECK that uses outdoor temperatures to constantly alter the range of the fence to keep it accurate to your initial settings.

WIRE CHECK is another feature that identifies wire problems and can alter the strength of the signal to make sure your boundary width is consistent as well.

The transmitter will even monitor the strength of the battery in the dog’s collar to ensure that it is on and working when it should be.

The Extreme Dog Fence is a system that keeps your dog from leaving your property without the hassle of having to erect a fence.

This dog fence system provides a collar for your dog that has the ability to shock them if they wander beyond their designated area.

The collar is made from a standard nylon webbing material that is red in color. If the red collar isn’t what you want, you can remove the hardware from this collar and attach it to whatever collar you choose. There are two different sets of contact probes that are interchangeable based on what is best for your dog.

The fence itself has a digital transmitter with a power supply.  It comes with 1,000 feet of 14-gauge boundary wire with a polyethylene jacket for protection.

You will bury the wire around the perimeter of the area you have chosen, generally your entire yard or one part of your yard. The wire should be buried between 1-inch and 18-inches deep for best practice, but they include landscaping staples in case you need to have the wire aboveground. In this case, you would use the staple to hold the wire down to the ground as low as possible so it isn’t a tripping hazard.

If you have an existing fence, this wire can also be run along the fence itself. If you want to have a boundary in a pond or lake, the coated wire even allows you to install it underwater.

The digital transmitter is the final piece of the puzzle and the brains of the system. You will set your signal field width on the transmitter which will determine how far from the fence that the collar will activate. You can cycle through AM radio frequencies to find one that works best.

The transmitter is to be mounted indoors as it is not waterproof and it should be more than three feet away from any large metallic objects.

There is a feature called TEMP CHECK that uses outdoor temperatures to constantly alter the range of the fence to keep it accurate to your initial settings.

WIRE CHECK is another feature that identifies wire problems and can alter the strength of the signal to make sure your boundary width is consistent as well.

The transmitter will even monitor the strength of the battery in the dog’s collar to ensure that it is on and working when it should be.

The Extreme Dog Fence is a system that keeps your dog from leaving your property without the hassle of having to erect a fence.

This dog fence system provides a collar for your dog that has the ability to shock them if they wander beyond their designated area.

The collar is made from a standard nylon webbing material that is red in color. If the red collar isn’t what you want, you can remove the hardware from this collar and attach it to whatever collar you choose. There are two different sets of contact probes that are interchangeable based on what is best for your dog.

The fence itself has a digital transmitter with a power supply.  It comes with 1,000 feet of 14-gauge boundary wire with a polyethylene jacket for protection.

You will bury the wire around the perimeter of the area you have chosen, generally your entire yard or one part of your yard. The wire should be buried between 1-inch and 18-inches deep for best practice, but they include landscaping staples in case you need to have the wire aboveground. In this case, you would use the staple to hold the wire down to the ground as low as possible so it isn’t a tripping hazard.

If you have an existing fence, this wire can also be run along the fence itself. If you want to have a boundary in a pond or lake, the coated wire even allows you to install it underwater.

The digital transmitter is the final piece of the puzzle and the brains of the system. You will set your signal field width on the transmitter which will determine how far from the fence that the collar will activate. You can cycle through AM radio frequencies to find one that works best.

The transmitter is to be mounted indoors as it is not waterproof and it should be more than three feet away from any large metallic objects.

There is a feature called TEMP CHECK that uses outdoor temperatures to constantly alter the range of the fence to keep it accurate to your initial settings.

WIRE CHECK is another feature that identifies wire problems and can alter the strength of the signal to make sure your boundary width is consistent as well.

The transmitter will even monitor the strength of the battery in the dog’s collar to ensure that it is on and working when it should be.

The Extreme Dog Fence is a system that keeps your dog from leaving your property without the hassle of having to erect a fence.

This dog fence system provides a collar for your dog that has the ability to shock them if they wander beyond their designated area.

The collar is made from a standard nylon webbing material that is red in color. If the red collar isn’t what you want, you can remove the hardware from this collar and attach it to whatever collar you choose. There are two different sets of contact probes that are interchangeable based on what is best for your dog.

The fence itself has a digital transmitter with a power supply.  It comes with 1,000 feet of 14-gauge boundary wire with a polyethylene jacket for protection.

You will bury the wire around the perimeter of the area you have chosen, generally your entire yard or one part of your yard. The wire should be buried between 1-inch and 18-inches deep for best practice, but they include landscaping staples in case you need to have the wire aboveground. In this case, you would use the staple to hold the wire down to the ground as low as possible so it isn’t a tripping hazard.

If you have an existing fence, this wire can also be run along the fence itself. If you want to have a boundary in a pond or lake, the coated wire even allows you to install it underwater.

The digital transmitter is the final piece of the puzzle and the brains of the system. You will set your signal field width on the transmitter which will determine how far from the fence that the collar will activate. You can cycle through AM radio frequencies to find one that works best.

The transmitter is to be mounted indoors as it is not waterproof and it should be more than three feet away from any large metallic objects.

There is a feature called TEMP CHECK that uses outdoor temperatures to constantly alter the range of the fence to keep it accurate to your initial settings.

WIRE CHECK is another feature that identifies wire problems and can alter the strength of the signal to make sure your boundary width is consistent as well.

The transmitter will even monitor the strength of the battery in the dog’s collar to ensure that it is on and working when it should be.

The Extreme Dog Fence is a system that keeps your dog from leaving your property without the hassle of having to erect a fence.

This dog fence system provides a collar for your dog that has the ability to shock them if they wander beyond their designated area.

The collar is made from a standard nylon webbing material that is red in color. If the red collar isn’t what you want, you can remove the hardware from this collar and attach it to whatever collar you choose. There are two different sets of contact probes that are interchangeable based on what is best for your dog.

The fence itself has a digital transmitter with a power supply.  It comes with 1,000 feet of 14-gauge boundary wire with a polyethylene jacket for protection.

You will bury the wire around the perimeter of the area you have chosen, generally your entire yard or one part of your yard. The wire should be buried between 1-inch and 18-inches deep for best practice, but they include landscaping staples in case you need to have the wire aboveground. In this case, you would use the staple to hold the wire down to the ground as low as possible so it isn’t a tripping hazard.

If you have an existing fence, this wire can also be run along the fence itself. If you want to have a boundary in a pond or lake, the coated wire even allows you to install it underwater.

The digital transmitter is the final piece of the puzzle and the brains of the system. You will set your signal field width on the transmitter which will determine how far from the fence that the collar will activate. You can cycle through AM radio frequencies to find one that works best.

The transmitter is to be mounted indoors as it is not waterproof and it should be more than three feet away from any large metallic objects.

There is a feature called TEMP CHECK that uses outdoor temperatures to constantly alter the range of the fence to keep it accurate to your initial settings.

WIRE CHECK is another feature that identifies wire problems and can alter the strength of the signal to make sure your boundary width is consistent as well.

The transmitter will even monitor the strength of the battery in the dog’s collar to ensure that it is on and working when it should be.

Features

  • Covers up to 10 acres
  • 1,000 feet of 14-gauge boundary wire included
  • 60 feet of 16-gauge twisted wire included
  • Includes three antennas
  • Wire is waterproof and submersible
  • Shock collar probes can be installed on other collars
  • Probe lengths of 5/8″ or 7/8″ available
  • Made in the U.S.
  • Comes with 10 landscape staples
  • 100x training flags included to mark the boundary area to help train your dog visually
  • Rubber gloves included for installation

Specifications


Brand
Extreme Dog Fence

Model
In our analysis of 38 expert reviews, the Extreme Dog Fence Waterproof Submersible Invisible Fence placed 8th when we looked at the top 15 products in the category. For the full ranking, see below.

From The Manufacturer

The eXtreme Dog Fence system includes everything you need to setup your inground dog fence, train your dog, and ensure that your dog stays safely contained in the perimeter you set. The transmitter is feature rich. It can accommodate up to 25 full acres, and gives you the option to change the radio frequency the system functions on (to avoid interference with any neighboring electric dog fence). The collar receiver is one of the smallest and lightest available. The receiver is a mere 1.1oz. and has small enough a profile to comfortably fit a dog as small as 8 pounds. It is not only waterproof, but submersible to 10 feet.

Expert Reviews


What experts liked

The transmitter included in the system has an easy-to-read digital display, and in the event of a thunderstorm, the included surge protector will protect the transmitter from a power surge that may be caused by a lightning strike.
With its waterproof, wireless dog collars and combined wired and wireless technology, this dog fence is one you can trust to keep your pups contained.
High-Quality Cable Kit- This in-ground electric dog fence has exceedingly high-quality cables. The wires are superbly strong, thick, perfectly long (no splicing), and have a tough insulation jacket around. Thin low-quality cables are not only dangerous to use, but also tremendously increase the chances of a rupture, require high maintenance, and prove to be extremely expensive. This wire, on the other hand, is very strong and of top quality.
-
It utilizes thick 14-gauge wire to create the boundaries. It comes with up to 5,000 feet of wire to create a massive area up to 25 acres in size.
The best feature of this collar is the Digital Frequency Encoding. Digital Frequency Encoding eliminates any stray signal interference from neighboring electronic fences or other signal generating devices.
Covers 500 ft. perimeter which can be increased by adding more receptor flags.
-

What experts didn't like

No Rust Protection- The wires are strong and work absolutely fine. But on the downside, they get rusty very easily. They may be used perfectly in dry season, but not in the rainy season.
-
The only drawback to the eXtreme Dog Fence collar that I can see is that the battery is NOT rechargeable. The battery included has a 2-4 month lifespan
For unruly dogs, prior training is required to avoid ground digging.
-
View our Invisible Fence buying guide for in-depth advice and recommendations.

More to explore